Faucet Repair in Missoula, MT
A faucet that drips, leaks under the sink or will not shut off can usually be repaired in one visit.
Find out what kind of faucet you haveLicensed plumbers who work in Missoula

What kind of faucet you have
Faucet repair in Missoula depends on what is inside the faucet. Most faucets in homes today use a cartridge, a ceramic disc or a ball inside the handle. Older faucets often use rubber washers that wear down with every turn.
You can usually tell from the handles. Two separate handles that turn several times to close often mean washers or cartridges. A single lever that moves up and down and side to side usually means a cartridge, a disc or a ball.
Knowing the brand helps too. It is often printed on the base, the handle or the underside of the spout, and it tells the plumber which parts to bring.
What each faucet problem points to
Faucets fail in a few predictable ways. The symptom points to the part that has worn.
Dripping from the spout
A worn washer, seat, cartridge or disc that no longer seals when the handle is closed.
Water around the handle
Worn O rings or packing around the stem or cartridge.
Water under the sink
A loose or worn supply line, or a leak at the faucet base where it meets the countertop.
Weak flow
Grit caught in the screen inside the spout tip, or debris lodged in the cartridge.

Two quick fixes you can try
Before you call, these simple steps solve some faucet problems on their own.
Clean the aerator
Twist off the spout tip by hand, or with pliers wrapped in a cloth, rinse the mesh screen and refit it. This often brings weak flow back to normal.
Check the shutoff valves
Look under the sink for the two small valves. If water is leaking at the supply lines, closing these stops it until the repair.
If the faucet still drips or leaks after this, the parts inside need replacing.
Faucet dripping or leaking under the sink?
Shut the two small valves in the sink cabinet and ask about faucet repair in Missoula. A licensed Missoula plumber can visit to fix it.
How a plumber repairs a faucet
The plumber shuts off the water under the sink, takes the handle apart and replaces the worn washer, cartridge, disc or seals with parts that match the faucet. Supply lines are checked and replaced if they are worn or kinked.
When a faucet is very old, corroded or its parts are no longer made, the plumber will explain whether replacing the whole faucet makes more sense. You decide which way to go.
- Shut off the supply under the sink
- Replace the worn parts inside the handle
- Check the supply lines and the base seal
- Test for drips and full flow
Outside faucets in a Missoula winter
Outside faucets need special care here. A hose still attached in winter holds water in the faucet body, and the length of pipe inside the siding can freeze and split while the faucet looks untouched.
Disconnect hoses before the first hard frost, shut the indoor valve that feeds each outside faucet where the house has one, and leave the outdoor faucet open so the pipe runs dry. When that short pipe does split, the burst pipe repair page covers what comes next.
Kitchen faucets and their extra parts
Kitchen faucets have more to go wrong than bathroom faucets. Pull down sprayers have a hose that can wear and leak under the sink, and a side sprayer has its own valve that can stick.
If water appears in the cabinet only when you use the sprayer, the hose or its connection is the likely cause. That repair is usually quick once the right hose is on hand.
Signs a faucet needs attention soon
- A drip that gets faster over a few weeks
- Water collecting in the cabinet under the sink
- A handle that feels loose, stiff or grinds when you turn it
- Hot and cold that no longer mix the way they used to
- Mineral crust or green stains around the base
Each of these is easier to fix early, before a worn part damages the faucet body or a leak damages the cabinet.
Faucet supply lines and shutoff valves
Every faucet connects to the water supply through two flexible lines under the sink, each with its own small shutoff valve. These lines wear out over the years and can burst without warning, so they are worth checking whenever a faucet is repaired.
Old multi turn valves can seize if they are never used. Turning them off and on once a year keeps them working, so you can stop the water quickly if a line ever fails.
Faucet repair questions
- Should a small faucet drip be repaired?
- Why is the water flow weak from just one faucet?
- Why does my faucet leak from the handle?
- Should I repair or replace an old faucet?
- Can a leaking faucet damage the cabinet under the sink?
- Why does my faucet make a squealing noise?
- Can hard water damage a faucet?
- What should I do if a faucet will not shut off?
- Does a faucet repair mean replacing the whole faucet?
Should a small faucet drip be repaired?
Yes. Even a slow drip runs every hour and usually gets worse over time. It is often a simple repair.
Why is the water flow weak from just one faucet?
Usually the little screen in the spout tip is clogged. Twist the tip off and rinse it. If flow is still weak, the cartridge may be clogged.
Why does my faucet leak from the handle?
Water around the handle usually means the O rings or seals around the stem have worn out. They can be replaced without changing the whole faucet.
Should I repair or replace an old faucet?
Repair makes sense when parts are available and the faucet is in good condition. Replacement is better when the body is corroded or parts are no longer made.
Can a leaking faucet damage the cabinet under the sink?
Yes. A slow leak at a supply line or the faucet base can soak the cabinet floor and cause swelling or mold. Check under the sink every few months.
Why does my faucet make a squealing noise?
A worn washer or a loose part inside the handle can vibrate as water flows past. Replacing the worn part usually stops the noise.
Can hard water damage a faucet?
Mineral buildup can clog the aerator and wear the parts inside the faucet faster. Cleaning the aerator now and then and wiping crust from the base helps.
What should I do if a faucet will not shut off?
Close the two small valves under the sink by turning them clockwise. If they will not turn, close the main water valve and call.
Does a faucet repair mean replacing the whole faucet?
Rarely. Most drips and leaks come from a washer, cartridge or seal that can be swapped while the faucet body stays where it is.
More leaks, toilets and faucets help
- Leak detectionFinding water you can hear or smell but cannot see.
- Toilet repairRunning, rocking, clogging or leaking at the base.
Faucet repair in Missoula
Call and tell us what the faucet is doing. One of the licensed plumbers working in Missoula can head over to fix the drip or leak.